0 Positions of Each Hand (Base Position)
24 hour hand : 24:00
Hour hand, minute hand : 00:00
Second hand : 00 seconds
Function hand : 0-position (12:00 position)
Perform the “0-Position Correction” procedure when the hands are not at the
positions indicated above.
[0-Position Correction]
0-Position Correction of Function Hand:
1. Pull the crown out to Position 1 in the chronograph [CHR] mode to correct the
function hand.
(1) Press button (A) to align the function hand at the 0-position immediately
after the date has changed (12:00 position).
• Pressing button (A) advances the function hand by one second each time it
is pressed. Continuously pressing button (A) causes the function hand to
advance continuously.
• The date changes by one day when the function hand completes four
revolutions.
9. Hand 0-Position Check and Correction
Before using this watch, check that the functions of the watch operate properly by
performing the following procedure.
0-Position: This refers to the base position of each hand for enabling this
watch to function properly.
[0-Position Check]
1. Turn the crown to switch the watch to the
chronograph [CHR] mode.
2. Pull the crown out to Position 1 to switch
the watch to the 0-position correction
mode. The 24 hour hand, hour hand,
minute hand, second hand and function
hand rapidly advance. Check that each
hand indicates the 0-position.
20 21
0-position correction
(1)