56
Before executing the all-reset, rst check that the watch is fully charged and that the
second hand is moving in 1-second intervals.
If the all-reset is executed while the watch is insufciently charged, subsequent
operations will become impossible and the watch will completely stop.
1. Rotate the crown while in position 1 to align the mode hand with chronograph [CHR]
mode.
2. Pull the crown out two steps to position 2 (reference or 0-position correction mode).
• Each hand and the date will move to their recorded reference or 0-positions and then
stop.
3. Simultaneously press and hold both the upper and lower right buttons (A) and (B) for
approximately 2 seconds, then release.
• A conrmation sound will be emitted, and then a hand movement demonstration
will be performed in order of second hand, hour hand/minute hand/24-hour hand,
and function hand/date to indicate that the all-reset has completed.
Note:
After the all-reset, always correct the reference or 0-positions for each hand.
Then correctly adjust each mode before using the watch.
