32
[Correcting the Reference or 0-Position]
<Correcting the Reference or 0-Positions of the 24-Hour Hand, Hour Hand,
Minute Hand, and Second Hand>
1. Pull the crown out two ‘steps’ to position 2 while in chronograph [CHR] mode to
correct the reference or 0-position of each hand.
2. Press the upper right button (A) to correct the second hand by 1-second each time the
button is pressed. Hold down the upper right button (A) for rapid advance.
3. Rotate the crown to correct the 24-hour hand, hour hand, and minute hand and adjust
each hand to its correct reference or 0-position.
(1) Rotate the crown to the right (clockwise) 1 ‘click’ to move the hour hand and
minute hand clockwise.
(2) Rotate the crown to the left (counterclockwise) 1 click to move the hour hand and
minute hand counterclockwise.
• Quickly Rotate the crown 2 or more clicks consecutively to advance the hands
rapidly. Rotate the crown to the left (counterclockwise) or right (clockwise) by 1
click to stop rapid advance.
If the rapid advance is not stopped, the hands will automatically stop after “12
hours” advancement.
