623941
15
Zoom out
Zoom in
Previous page
1/19
Next page
28 29
3. Once each hand has been aligned at the 12:00 position and the date has been
aligned at "1", return the crown to the 0 position (normal position).
Note (1): It takes about 1 second for the watch to store the reference position in
memory. Once the reference position has been stored in memory, the
second hand will begin irregular two-second interval movement. The
reference position may not be stored in memory if the crown is operated
before the start of irregular two-second interval movement after return-
ing the crown to the normal position.
(2):The second hand will continue to remain stopped even if the crown is
returned to the normal position unless the reference position alignment
procedure is performed.
4. After performing the reference position alignment procedure, properly reset the
time and date.
* The watch shows 12:00 AM after reference position alignment has been per-
formed. Set the time and date by referring to "3. Setting the Time and Date"
while paying attention to AM and PM.
9. Reference Position Alignment
After performing the all-reset procedure, align the hour and minute hands at their
reference positions by pulling out the crown to the second click, and the second
hand and date to their reference positions by pulling out the crown to the first click.
1. Align the hour and minute hands at the 12:00 position with the crown pulled out
to the second click.
(1) Turning the crown to the right moves the hour and minute hands forward.
(2) Turning the crown to the left moves the hour and minute hands backward.
* Turning the crown to the right continuously causes the hour and minute hands to
advance rapidly to the right, while turning the crown continuously to the left
causes the hour and minute hands to advance rapidly to the left. Turn the crown
to the left or right to stop the hands from advancing rapidly.
2. Align the second hand at the 12:00 position with the crown pulled out to the first
click. In addition, align the date at "1".
(1) Turning the crown to the right causes the second hand to move one second
forward.
(2) Turning the crown to the left causes the date to move one day forward.
* Turning the crown continuously to the left causes the date to advance continu-
ously. Turn the crown to the left or right to stop the date from advancing con-
tinuously.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citizen Cal E760 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citizen Cal E760 in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info