(4) Press button (A).
· The function hand moves back and forth and then enters the date
correction mode.
(5) Turn the crown to rotate the function hand and align the date between
the 31st and 1st, and then turn the crown to align the function hand at
MON.
A Turn the crown continuously to the right (rapidly by two clicks or
more).
· The function hand makes five revolutions in the clockwise
direction and the date changes to the 1st.
B Continue to rotate the function hand until the date reaches the 31st.
C Turn the crown to the left or right by one click to interrupt
movement of the function hand when the date has changed to the
31st.
D Rotate the function hand while turning the crown to the right one
click at a time, and after confirming that the date has reached an
intermediate location between the 1st and 31st, always make sure to
then align the function hand at the MON position.
(6) Return the crown to the normal position. This completes the reference position
correction procedure.
· After correcting the reference position, always make sure to set the mode to the TME
(time) mode and reset the watch to the correct time by Free Reception.
56 57
13. Photoelectric Power Generation
Function
This watch uses a secondary battery to store electrical energy. Once fully charged, it will
continue to keep the correct time for about 6 months during normal use (when the Power
Save function is not activated). Furthermore, the watch will keep the correct time for about
1 year when the Power Save function is activated.
<For Optimum Use of this Watch>
In order to use this watch comfortably, try to keep the watch charged at all times. Charge
the watch by exposing the watch dial (containing the solar cell) to direct sunlight or light
from a fluorescent lamp.
<Try to Keep the Watch Charged at all Times>
· If you usually wear long sleeves, the fabric may cover the watch and prevent it from being
exposed to light resulting in the watch becoming insufficiently charged. Try to kept the
watch charged especially during winter months.
· When the watch is removed, try to place it next to a window or other location that allows
the dial to be exposed to sunlight. This will enable charging to continue and allow the
watch to continue to run properly at all times.
[Position of
Function Hand]
[Position of
Date Display]
