4342
<Time Correction Procedure>
Pull the crown out to Position 1 and turn to align the mode hand to [TME] (time).
(1) Pull the crown out to Position 2 (time correction position).
· The second hand turns continuously and stops at the daylight savings time ON or OFF
position.
(2) Press button (B) for about 2 seconds.
· When button (B) has been pressed for 2 seconds or more, the second hand advances
(clockwise direction) to the 0 seconds position. Release your finger from button (B)
once the second hand has stopped at the 0 seconds position.
(3) Turn the crown to align the minute hand, hour hand and 24 hour hand at the current time.
A Turning the crown to the right (by one click) causes the minute hand, hour hand and 24
hour hand to advance by one minute.
B Turning the crown to the left (by one click) causes the minute hand, hour hand and 24
hour hand to go back by one minute.
· Turning the crown continuously (rapidly by two clicks or more) causes the minute
hand, hour hand and 24 hour hand to move continuously.
· Turn the crown to the left or right to interrupt continuous movement of the hands.
· Check AM and PM with the 24 hour hand to set the time correctly.
(4) Return the crown to the normal position in synchronization with a telephone time signal
or other time service. This completes the time correction procedure.
10. Manually Setting the Time and Daylight
Savings Time
· The time can be set manually when radio waves are unable to be received.
· Daylight savings time is switched on or off automatically when radio waves have been
received. Furthermore, remove the watch from your wrist before receiving radio waves to
ensure that the time is set correctly.
A. Setting the Time
(The same time is displayed at the three locations of the TME mode. It is only necessary
to set the time at one of these locations.)