16 17
<Before Diving>
* Please make sure that the crown is pushed in firmly and the screw is securely
tightened.
* Please check that the band is securely attached to the watch.
* Please confirm that there are no cracks, scratches, chips or other abnormalities in
the band and glass.
* Please check that the rotating bezel rotates properly.
* Please check that the time and date are set correctly.
* Please check that the second hand is moving properly.
If the second hand is moving at two-second intervals, this means that the watch is
not sufficiently charged. Sufficiently charge the watch when this occurs.
<During Diving>
* Never attempt to turn or pull out the crown underwater. This can cause defective
water resistance or other malfunction.
* Be careful to avoid bumping your watch on hard objects such as diving equipment
or rocks.
<After Diving>
* Completely wash off any sea water, mud or sand adhered to the watch with pure
water after checking that the crown and screw are tightened. Wipe off any excess
moisture with a dry cloth.