556249
26
Zoom out
Zoom in
Previous page
1/34
Next page
4948
12. SETTING FUNCTION HAND AT “0” POSITION
(1) Set the watch to the Time mode or
Chronograph mode.
Turn the crown to loosen it and pull it
out to the second click stop position.
(2) Press button A or B to set the
function hand to the “0” position.
(3) Press the crown in to the normal
position and turn it until it is tightly
screwed against the case.
0
m
3
0
4
0
2
0
3
6
9
1
2
1
5
5
0
L
V
.
2
L
V
.
1
N
G
“0” position
Within ±15 graduations before/after
the “0” point.
Adjusting position
B
A
* The aforementioned procedure is effectual only when the hand is located
within ±15 graduations before/after the “0” point. When the hand is located
outside the adjustable range, correct the “0” position of the hand referring to
“13. ALL RESET/ADJUSTING HAND POSITION”.
* If the watch has been left without any operation for 3 minutes or longer as the
crown is pulled to the second click stop position, the function hand does not
move regardless of button operation. If the watch falls into such the condition,
press the crown into the normal position and make a fresh start to adjust the
hand position.
* Before unscrewing and pulling out the crown, make sure that the crown is not
wet.
Automatic time correction function
If it takes 4 minutes or less to adjust the position of the function hand in
the Chronograph mode, the watch automatically sets the hour, minute and
second hands for the correct time immediately after the adjustment by the
automatic time correction function. Therefore, if adjustment is finished within
4 minutes, the watch has no need of manual time correction. However, if the
crown is turned during adjustment, the watch will not indicating a correct
time. If adjustment is not complete within 4 minutes, you will need to not only
adjust the “0” position of the second indicator (function hand) in the
Chronograph mode but also to set the correct time.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citizen Cal B470 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citizen Cal B470 in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info