553504

Citizen Cal B110 Manual

12
Zoom out
Zoom in
Previous page
1/14
Next page
10. ALL-RESET
The display of this watch may not read correctly as a result of being subjected
to the effects of static electricity or strong impact and so forth. When this
happens, perform the procedure described in section "11. REFERENCE POSITION
ALIGNMENT" after performing the all-reset procedure described below.
1. Pull out the crown to the second click.
• The second hand moves to the 0-position stored in memory and stops.
2. Continuously press button A for at least 1 second.
• The second and hour hands perform a demonstration movement (forward
movement backward movement ---> forward movement). This completes the all-
reset procedure. Always make sure to perform the reference position
alignment procedure after performing all-reset.
Note:
Demonstration movement is not performed when the watch is insufficiently
charged. Perform the all-reset procedure only after charging the watch
sufficiently.
11. REFERENCE POSITION ALIGNMENT
After performing the all-reset procedure, align the second and minute hands at
their reference positions by pulling out the crown to the second click, and the
hour hand and date to their reference positions by pulling out the crown to the
first click.
1. Align the second and minute hands at the 12:00 position with the crown pulled
out to the second click.
• Turning the crown to the right moves the second and minute hands forward.
• Turning the crown to the left moves the second and minute hands backward.
• Turning the crown continuously causes the hands to advance rapidly. Turn
the crown to the left or right to stop the hands from advancing rapidly.
Note 1:
It takes about 1 second for the watch to store the reference position
in memory. Once the reference position has been stored in memory, the second
hand will begin irregular two-second interval movement. The reference position
may not be stored in memory if the crown is operated before the start of
irregular two-second interval movement after returning the crown to the normal
position.
Note 2:
The second hand will continue to remain stopped even if the crown is
returned to the normal position unless the reference position alignment
procedure is performed.
6. After performing the reference position alignment procedure, properly reset
the time and date.
• The watch shows 12:00 AM for the time of reference position alignment after
the all-reset procedure has been performed. Set the time and date by
referring to section
"4. SETTING THE TIME AND DATE”
, while being careful
not to incorrectly set AM and PM.
1. Align the date between the 31st and 1st
and the hour hand at the 12:00 position
with the crown pulled out to the first
click.
• Turning the crown to the right causes
the hour hand to move forward.
• Turning the crown to the left causes
the hour hand to move backward.
2. The date moves with the hour hand.
Continuously move the hour hand to set the
date between the 31st and 1st.
3. Align the hour hand at 12:00.
4. After each hand and the date have been
set, return the crown to the normal
p
osition.
Return to Table of Contents
Return to Table of Contents
… 12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citizen Cal B110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citizen Cal B110 in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Citizen Cal B110

Citizen Cal B110 Quick start guide - German - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info