300769
147
Zoom out
Zoom in
Previous page
1/165
Next page
5-42
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 5 Linksys IP Phone Field Reference
Ext Tab
Field Description
Proxy
SIP proxy server and port number set by the Service Provider for all outbound requests.
For example: 192.168.2.100:6060.
Use Outbound Proxy Enable the use of <Outbound Proxy>. If set to no, <Outbound Proxy> and <Use OB Proxy
in Dialog) is ignored. Defaults to no.
Outbound Proxy SIP Outbound Proxy Server where all outbound requests are sent as the first hop.
Use OB Proxy In Dialog Whether to force SIP requests to be sent to the outbound proxy within a dialog. Ignored
if <Use Outbound Proxy> is no or <Outbound Proxy> is empty.
Defaults to yes.
Register Enable periodic registration with the <Proxy>. This parameter is ignored if <Proxy> is not
specified.
Defaults to yes.
Make Call Without Reg Allow making outbound calls without successful (dynamic) registration by the unit. If no,
the dial tone will not play unless registration is successful.
Defaults to no.
Register Expires Allow answering inbound calls without successful (dynamic) registration by the unit. If proxy
responded to REGISTER with a smaller Expires value, the phone will renew registration based
on this smaller value instead of the configured value. If registration failed with an Expires too
brief error response, the phone will retry with the value given in the Min-Expires header in the
error response.
Defaults to 60.
Ans Call Without Reg
If enabled, the user does not have to be registered with the proxy to answer calls.
Defaults to no.
Use DNS SRV Whether to use DNS SRV lookup for Proxy and Outbound Proxy.
Defaults to no.
DNS SRV Auto Prefix If enabled, the phone will automatically prepend the Proxy or Outbound Proxy name with
_sip._udp when performing a DNS SRV lookup on that name.
Defaults to no.
Proxy Fallback Intvl This parameter sets the delay (sec) after which the phone will retry from the highest
priority proxy (or outbound proxy) servers after it has failed over to a lower priority
server. This parameter is useful only if the primary and backup proxy server list is
provided to the phone via DNS SRV record lookup on the server name. (Using multiple
DNS A record per server name does not allow the notion of priority and so all hosts will
be considered at the same priority and the phone will not attempt to fall back after a fail
over).
Defaults to 3600
147


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco spa921 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco spa921 in the language / languages: English as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cisco spa921

Cisco spa921 User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info