300769
136
Zoom out
Zoom in
Previous page
1/165
Next page
5-31
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 5 Linksys IP Phone Field Reference
Phone Tab
Miscellaneous Line Key Settings
This section does not apply to the WIP310 wireless phone.
Line Key LED Pattern
Line key LED colors are described in “Line Key LEDs” section on page 3-22.
Note None of the following parameters apply to the SPA901.
This section does not apply to the WIP310 wireless phone.
Field Description
Extension Select an extension to be used for this line key. Choices are:
One-line phone: 1 or disabled,
Four-line phone: 1, 2, 3, 4, or disabled.
Six-line phone: 1, 2, 3, 4, 5, 6, or disabled.
Defaults to 1.
Short Name
(Not applicable to SPA901)
A short label shown on the LCD display for Line key 1/2/3/4/5/6.
Share Call Appearance
(Not applicable to SPA901)
Yes indicates that Line Key 1/2/3/4/5/6 is a shared call appearance. Otherwise this call
appearance is not shared (in other words it is private).
Defaults to no.
Field Description
SCA Line ID Mapping
Specifies the shared call appearance line ID mapping. Choose Vertical First or Horizontal
First. Each LED can hold two calls and the first call on an LED makes it light up. Horizontal
first means the second call makes the same LED flash. Vertical first means the second call
lights up the next LED.
For example, if Extension 101 is assigned to two LEDs, and Vertical First is selected, the sec-
ond call on Extension 101 lights up the second LED. The third call makes the first LED flash,
and the fourth call makes the second LED flash.
If Horizontal First is selected, the second call on Extension 101 makes the first LED flash.
The third call lights up the second LED, and the fourth call makes the second LED flash.
SCA Barge-In Enable
Enables the SCA Barge-In.
Defaults to no.
Field Description
Idle LED LED pattern during the Idle state, where the call appearance is not is in use and is
available to make a new call. Leaving this entry blank indicates the default value of c=g.
136


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco spa921 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco spa921 in the language / languages: English as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cisco spa921

Cisco spa921 User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info