300769
133
Zoom out
Zoom in
Previous page
1/165
Next page
5-28
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 5 Linksys IP Phone Field Reference
Regional Tab
Daylight Saving Time Rule
Enter the rule for calculating daylight saving time; it should include the start, end, and save
values. This rule is comprised of three fields. Each field is separated by ; (a semicolon) as
shown below. Optional values inside [ ] (the brackets) are assumed to be 0 if they are not
specified. Midnight is represented by 0:0:0 of the given date.
This is the format of the rule: Start = <start-time>; end=<end-time>; save = <save-time>.
The <start-time> and <end-time> values specify the start and end dates and times of
daylight saving time. Each value is in this format: <month> /<day> /
<weekday>[/HH:[mm[:ss]]]
The <save-time> value is the number of hours, minutes, and/or seconds to add to the
current time during daylight saving time. The <save-time> value can be preceded by
a negative (-) sign if subtraction is desired instead of addition. The <save-time> value
is in this format: [/[+|-]HH:[mm[:ss]]]
The <month> value equals any value in the range 1-12 (January-December).
The <day> value equals [+|-] any value in the range 1-31.
If <day> is 1, it means the <weekday> on or before the end of the month (in other
words the last occurrence of < weekday> in that month).
The <weekday> value equals any value in the range 1-7 (Monday-Sunday). It can
also equal 0. If the <weekday> value is 0, this means that the date to start or end
daylight saving is exactly the date given. In that case, the <day> value must not be
negative. If the <weekday> value is not 0 and the <day> value is positive, then
daylight saving starts or ends on the <weekday> value on or after the date given. If
the <weekday> value is not 0 and the <day> value is negative, then daylight saving
starts or ends on the <weekday> value on or before the date given.
The abbreviation HH stands for hours (0-23).
The abbreviation mm stands for minutes (0-59).
The abbreviation ss stands for seconds (0-59).
The default Daylight Saving Time Rule is start=4/1/7;end=10/-1/7;save=1.
DTMF Playback Level Local DTMF playback level in dBm, up to one decimal place.
Defaults to -16.
DTMF Playback Length Local DTMF playback duration in milliseconds.
Defaults to .1.
Inband DTMF Boost Controls the amount of amplification applied DTMF signals.
Choices are OdB, 3dB, 6dB, 9dB, 12dB, 15dB, or 18dB.
Defaults to 12dB.
Field Description
133


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco spa921 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco spa921 in the language / languages: English as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cisco spa921

Cisco spa921 User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info