300769
35
Zoom out
Zoom in
Previous page
1/165
Next page
2-12
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 2 Getting Started
Using the Administration Web Server
Turning on the Phone
If you are using an external power source, instead of Power over Ethernet (PoE), plug the adapter to an
electrical outlet. Use only the adapter supplied for the specific phone.
The phone executes a boot-up sequence when the power source is connected.
During this sequence, the display first shows LINKSYS® or a customized message and then
“Initializing Network.”
All of the lights on the phone flash.
After the sequence, which should take about five seconds, the phone displays the standard menu for
the phone.
The date, name, and number of the phone will display on the top line of the LCD screen.
At the bottom of the LCD screen, redial, dir, cfwd, and dnd are displayed over their associated soft
buttons. A small arrow appears next to dnd indicating that more menus can be accessed by pushing the
right side of the navigation button.
If the phone does not display the appropriate screen, verify the installation and connectivity. If these are
correct, try unplugging the phone and plugging it back in again. If you still do not see the display, refer
to the
“Troubleshooting FAQ” section on page 3-42.
Using the Administration Web Server
This section describes how to use the administration web server to configure the Linksys IP phone. It
includes the following topics:
Connecting to the Administration Web Server, page 2-12
Administrator Account Privileges, page 2-13
Connecting to the Administration Web Server
To access the Linksys IP phone administration web server, perform the following steps.
Step 1 Launch a web browser on a computer connected to the Linksys IP phone .
Step 2 Determine the address of the administration web server.
For a SPA900 Series phone with an LCD display, press Menu, 9, 2, or following these steps:
a. Press the Menu button.
b. Scroll down to Network and press select.
c. View the Current IP (Option 2).
For a SPA901 phone follow these steps:
a. Press **** on the keypad to access the IVR menu.
b. Press 110# to determine the Internet (WAN) IP address.
Step 3 Direct the browser to the IP address of the Linksys IP phone.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco spa921 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco spa921 in the language / languages: English as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cisco spa921

Cisco spa921 User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info