300769
18
Zoom out
Zoom in
Previous page
1/165
Next page
1-7
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 1 Introducing Linksys IP Phones
Feature Descriptions
Other Features
Table 1-4 summarizes the features provided by Linksys IP Phones.
Ta b l e 1-4 Linksys Phone Features
Feature Description
Music On Hold On a connected call, Linksys IP phones may place the remote party on call.
If the remote party indicates that they can still receive audio while the call is
holding, the MOH server sends streaming audio.
Secure Calls A user (if enabled by service provider or administrator) has the option to
make an outbound call secure in the sense that the audio packets in both
directions are encrypted.
Adjustable Audio
Frames Per Packet
This feature allows you to set the number of audio frames contained in one
RTP packet. Packets can be adjusted to contain from 1–10 audio frames.
Increasing the number of packets decreases the bandwidth utilized, but it
also increases delay and may affect voice quality.
DTMF In-Band and Out-of-Band (RFC 2833) (SIP INFO) Linksys IP phones may
relay DTMF digits as out-of-band events to preserve the fidelity of the digits.
This can enhance the reliability of DTMF transmission required by many
IVR applications such as dial-up banking and airline information.
Call Progress Tone
Generation
Linksys IP phones have configurable call progress tones. Parameters for
each type of tone may include number of frequency components, frequency
and amplitude of each component, and cadence information.
Call Progress Tone Pass
Through
This feature allows you to hear the call progress tones (such as ringing) that
are generated from the far-end network.
Jitter Buffer—Dynamic
(Adaptive)
Linksys IP phones can buffer incoming voice packets to minimize
out-of-order packet arrival. This process is known as jitter buffering. The
jitter buffer size proactively adjusts or adapts in size, depending on changing
network conditions.
Linksys IP phones have a Network Jitter Level control setting for each line
of service. The jitter level decides how aggressively Linksys IP phones try
to shrink the jitter buffer over time to achieve a lower overall delay. If the
jitter level is higher, it shrinks more gradually. If jitter level is lower, it
shrinks more quickly.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco spa921 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco spa921 in the language / languages: English as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cisco spa921

Cisco spa921 User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info