300915

Cisco spa901 Manual

48
Zoom out
Zoom in
Previous page
1/165
Next page
3-5
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 3 Managing Linksys IP Phones
Localization
When entering digits in numeric mode, enter the corresponding digits from the numeric key pad. When
entering letters or symbols during alphanumeric mode, the phone shows a template of two or more
choices as you press each digit key. Scroll through the choices by pressing the same key multiple times.
To accept a symbol as input, do one of the following:
• Stop pressing the digit key for 1.5 seconds
• Pressing another digit key
• Navigate to another input field (if applicable) by pressing the UP/DOWN key, or
• Save the value by pressing the proper soft key, such save or ok
When entering an IP address, pressing the * digit inserts a dot (.), or a colon (:) if there are 3 dots entered
already.
When entering numeric, alphanumeric, or IP address values, the following additional soft keys are
available for easier editing:
• <<—Move cursor to the left by one character
• >>—Move cursor to the right by one character
• erase<—Erase the character to the left of the cursor
• clear—Clear the entire entry
Holding down the <<, >>, or erase<, soft key or any numeric keypad keys automatically repeats the
entry. If the input value is wider than the LCD can display, the SPA900 Series phone automatically
scrolls the input to the left so that you can continue to enter input. On the other hand, the SPA900 Series
phone stops accepting further input for a given field if the maximum allowed input length has been
reached for that field. For Boolean input, the SPA900 Series phone displays (y/n); pressing the soft key
toggles the current input between yes and no.
When the SPA900 Series phone displays an option, pressing the soft key either changes the input field
to the next available choice in round-robin fashion, or displays a menu of choices. For most settings, the
input value is saved once you press save or ok before exiting the edit screen for that setting.
However, there are a few exceptions where you must press save again when all the required changes
have been made to the settings so that they are saved into the configuration at the same time. These
exceptions are:
• Preferences
• Call Forward
• Network
• Speed Dialing
Localization
This section applies to the following SPA900 Series IP Phones:
• SPA922
• SPA942
• SPA962
This section describes how to localize the IP phone display language for these models, referred to in this
section as SPA9x2 phones.
SPA9x2 phones support setting an alternative language on the user display. The administrator or service
provider defines up to nine languages, in addition to English, to be made available and hosts the
dictionaries for each of the languages on the HTTP or TFTP provisioning server. Language support
follows Cisco dictionary principles.
The paragraphs describe parameters that can be defined in the SPA9x2 configuration file.
… 48 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco spa901 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco spa901 in the language / languages: English as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cisco spa901

Cisco spa901 User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info