301455

Cisco spa509g ip Manual

39
Zoom out
Zoom in
Previous page
1/325
Next page
Configuring Lines
Configuring a Line Key
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 38
2
Call information (such as calling party or called party) displays on all devices that
are sharing a line. If one of the devices turns on the Privacy feature, other devices
that share the line will not see outbound calls that are made from the device that
turned on privacy. All devices will still see inbound calls to the shared line.
Devices with shared-call appearances can initiate independent transfer or
conference transactions.
When a call is made to the extension number for the shared-call, all sharing
Cisco SPA IP phones ring. Any IP phone can answer the call. If the active phone
places the shared call on hold, the call can be resumed from any of the sharing
Cisco SPA IP phones by pressing the corresponding line key (except for the
Cisco SPA502G) or the Select button when the Resume icon is displayed
(Cisco WIP310).
The Cisco SPA300 Series and Cisco SPA500 Series IP phones support the private
hold feature for MetaSwitch and BroadSoft. Users who have a shared line can
press PrivHold, and the call can only be resumed by the user who placed the call
on hold.
Each IP phone can be configured independently. Although the account information
is usually the same for all of the Cisco SPA IP phones, settings such as the dial plan
or the preferred codec can vary between phones and continue to support shared-
line appearance.
To configure the line:
STEP 1 Click Admin Login > advanced > Voice.
STEP 2 Click the Ext_n tab of the extension that is shared (do not use Ext 1).
STEP 3 Under General in the Line Enable list, choose yes.
STEP 4 Under Share Line Appearance in the Share Ext list, select shared. If you set this
extension to private (not shared), the extension does not share calls, regardless of
the Share Call Appearance setting on the Phone tab. If you set this extension to
shared, calls follow the Share Call Appearance setting on the Phone tab. On the
Cisco SPA500 Series phones that have line buttons, a hollow telephone icon is
displayed next to the shared line button. For the Cisco SPA525G or
Cisco SPA525G2, a telephone icon is displayed.
STEP 5 In the Shared User ID field, enter the user ID (name) of the phone with the extension
that is being shared.
Downloaded from www.Manualslib.com manuals search engine
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco spa509g ip at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco spa509g ip in the language / languages: English as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cisco spa509g ip

Cisco spa509g ip Additional guide - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info