605000
4
Zoom out
Zoom in
Previous page
1/8
Next page
1-4
Cisco 837 Router and Cisco SOHO 97 Router Cabling and Setup Quick Start Guide
78-14782-07
Chapter 1 Cisco 837 Router and Cisco SOHO 97 Router Cabling and Setup
Configure the Router
Follow these steps to connect the router to the power supply, your local network, and your service
provider’s network:
Step 1 If you are connecting more than 4 PCs to the router, connect the router to a switch or hub using
a yellow Ethernet cable, as shown in Figure 1-2.
Step 2 To connect a PC directly to your router, do so as shown in Figure 1-2. Turn the PC off so that it will
obtain an IP address from the router when it is turned on. You can connect additional PCs to the
remaining numbered Ethernet ports.
Step 3 The console port is a service port to which you can connect a terminal or PC in order to configure the
software by using the command-line interface (CLI) or to troubleshoot problems with the router. If you
want access to the router console, connect a PC or terminal to the Console port on the router. For more
information, refer to the Cisco 837 and SOHO 97 Hardware Installation Guide.
Note By connecting the console port to an asynchronous modem using the optional SOHO/800 series router
modem cable, you can add dial backup and remote management capabilities to the router. Refer to the
Cisco 831 Router and SOHO 91 Router Hardware Installation Guide for more information.
Step 4 Connect the ADSL port on the router to the telephone wall jack using the lavender ADSL cable. If the
ADSL line is also used for voice communication, you can prevent disruption to data communication by
connecting the router to an ADSL splitter, or by installing microfilters between telephones or fax
equipment and the wall jack.
Step 5 Connect power to the router as shown in Figure 1-2 and turn on the router. Be sure to use the power
supply that was shipped with the router. Other Cisco power supplies will not connect to the router.
Configure the Router
Your router was shipped with a web-based configuration tool that you run from a web browser.
SDM Configuration Instructions
If the Cisco Router and Security Device Manager (SDM) Quick Start Guide was included in your
accessory kit, Cisco Router and Security Device Manager (SDM) is loaded on your router. Refer to that
document to configure your Cisco 837 router.
The following link contains more information about SDM, including release notes and other SDM
documentation.
http://www.cisco.com/en/US/products/sw/secursw/ps5318/
Note SDM is not shipped with SOHO 97 routers.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco SOHO 97 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco SOHO 97 in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cisco SOHO 97

Cisco SOHO 97 Installation Guide - English - 60 pages

Cisco SOHO 97 Installation Guide - German - 12 pages

Cisco SOHO 97 Installation Guide - Dutch - 10 pages

Cisco SOHO 97 Installation Guide - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info