301131

Cisco ip phone 7931g Manual

59
Zoom out
Zoom in
Previous page
1/266
Next page
2-5
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.1
OL-14587-01
Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network
Providing Power to the Phone
Power Outage
Your accessibility to emergency service through the phone is dependent on the
phone being powered. If there is an interruption in the power supply, Service and
Emergency Calling Service dialing will not function until power is restored. In the
case of a power failure or disruption, you may need to reset or reconfigure
equipment before using the Service or Emergency Calling Service dialing.
Power Guidelines
Table 2-1 provides guidelines that apply to external power and to PoE power for
the Cisco Unified IP Phones 7931G.
Ta b l e 2-1 Guidelines for Powering the Cisco Unified IP Phones 7931G
Power Type Guidelines
External power—
Provided through a Cisco
external power supply.
The CP-PWR-CUBE-3 external power supply may be used with the
Cisco
Unified IP Phones 7931G.
External power—
Provided through the
Cisco Unified IP Phone
Power Injector.
The Cisco Unified IP Phone Power Injector may be used with any
Cisco
Unified IP Phone. Functioning as a midspan device, the injector
delivers inline power to the attached phone. The Cisco Unified IP Phone
Power Injector is connected between a switch port and the IP Phone, and
supports a maximum cable length of 100m between the unpowered switch
and the phone.
PoE power—Provided by
a switch through the
Ethernet cable attached to
the phone.
• The Cisco Unified IP Phones 7931G supports IEEE 802.3af Power
over Ethernet.
• To ensure uninterruptible operation of the phone, make sure that the
switch has a backup power supply.
• Make sure that the CatOS or IOS version running on your switch
supports your intended phone deployment. Refer to the documentation
for your switch for operating system version information.
… 59 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco ip phone 7931g at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco ip phone 7931g in the language / languages: English as an attachment in your email.

The manual is 5,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cisco ip phone 7931g

Cisco ip phone 7931g Quick start guide - English - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info