301131
35
Zoom out
Zoom in
Previous page
1/266
Next page
1-17
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.1
OL-14587-01
Chapter 1 An Overview of the Cisco Unified IP Phone
Understanding Security Features for Cisco Unified IP Phones
Ta b l e 1-3 Overview of Security Features
Feature Description
Image authentication Signed binary files (with the extension .sbn) prevent tampering with
the firmware image before it is loaded on a phone. Tampering with
the image causes a phone to fail the authentication process and
reject the new image.
Customer-site certificate
installation
Each Cisco Unified IP Phone requires a unique certificate for device
authentication. Phones include a manufacturing installed certificate
(MIC), but for additional security, you can specify in Cisco
Unified
Communications Manager Administration that a certificate
be installed by using the Certificate Authority Proxy Function
(CAPF). Alternatively, you can install an LSC from the Security
Configuration menu on the phone. See the
“Configuring Security on
the Cisco Unified IP Phone” section on page 3-14 for more
information.
Device authentication Occurs between the Cisco Unified Communications Manager server
and the phone when each entity accepts the certificate of the other
entity. Determines whether a secure connection between the phone
and a Cisco
Unified Communications Manager should occur, and, if
necessary, creates a secure signaling path between the entities using
transport layer security (TLS) protocol. Cisco Unified
Communications Manager will not register phones unless they can
be authenticated by the Cisco
Unified Communications Manager.
File authentication Validates digitally signed files that the phone downloads. The phone
validates the signature to make sure that file tampering did not occur
after the file creation. Files that fail authentication are not written to
Flash memory on the phone. The phone rejects such files without
further processing.
Signaling Authentication Uses the TLS protocol to validate that no tampering has occurred to
signaling packets during transmission.
Manufacturing installed
certificate
Each Cisco Unified IP Phone contains a unique manufacturing
installed certificate (MIC), which is used for device authentication.
The MIC is a permanent unique proof of identity for the phone, and
allows Cisco
Unified Communications Manager to authenticate the
phone.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco ip phone 7931g at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco ip phone 7931g in the language / languages: English as an attachment in your email.

The manual is 5,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cisco ip phone 7931g

Cisco ip phone 7931g Quick start guide - English - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info