Manual Cisco IP Phone 7914 - Expansion Module (page 8 of 28) (English)

497620

Zoom out

Zoom in

1/28

2. Connect the Support Bar to the

Cisco IP Phone 7960

To connect the support bar to the Cisco IP Phone 7960, follow

these steps.

Step 1 Position the support bar on the back of the IP Phone so

that it fits flush with the phone.

Step 2 Locate the two connector pins.

Step 3 Using a flat head screwdriver, carefully push each of the

connector pins so that the support bar is firmly fastened

to the IP

Phone.

3. Connect the 7914 Expansion Module to the

Support Bar

To connect the Expansion Module to the support bar, follow

these steps.

Step 1 Position the phone so that the front of the phone is

facing up.

Step 2 Line up the two open slots on the bottom of the

7914

Expansion Module with the two hooks on the

support bar. Insert the hooks into the slots and then

rotate the top of the 7914

Expansion Module into the

support bar so that it rests flush with the bar.

Step 3 Tighten the thumb screw on the back of the

7914

Expansion Module.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cisco IP Phone 7914 - Expansion Module in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cisco IP Phone 7914 - Expansion Module Manual

Product: