Manual Cisco DPX2213 (page 25 of 52) (English)

604993

Zoom out

Zoom in

1/52

734348 Rev C 25

Introduction

1 Select locations for USB network devices. For more information, see How Do I

Select and Place USB Network Devices? (on page 23).

2 Connect the USB port on the cable modem to your computer.

3 Connect one or more USB network device to the cable modem.

Note: If you want to connect more than one USB network device to the cable

modem or to your computer, you will need to purchase and install a USB hub.

4 Connect the active RF coaxial cable to the CABLE connector on the back of the

cable modem. Use an optional cable signal splitter to add a TV, a DHCT or set-

top converter, or a VCR.

5 After all connections are complete, insert the AC power cord into the POWER

connector on the back of the cable modem, and then plug the cord into an AC

power source.

6 The cable modem begins an automatic search to locate and sign on to the

network. This process may take up to 5 minutes. The cable modem is ready for

use when the ONLINE LED status indicator on the front panel stops blinking

and illuminates continuously.

7 Verify that all USB devices are working properly.

Note: You will not be able to check the front panel LED status indicator on the

cable modem until after at least one USB network device is connected and

operating on the network.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cisco DPX2213 in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cisco DPX2213 Manual

Product: