604993
7
Zoom out
Zoom in
Previous page
1/52
Next page
734348 Rev C 7
Introduction
Back Panel Description
The following illustration shows the description and function of the back panel
components on the DPX2213.
USBCABLE
POWER
ETHERNET 1/2
TELEPHONE REBOOT
EMTA
2
1 2 3 4 5 6
T1171
5
Important! Do not connect your PC to both the Ethernet and USB ports at the same
time. Your modem will not function properly if both the Ethernet and USB ports are
connected to your PC at the same time.
1 POWER – Connects the cable modem to the AC power supply that is provided
with your cable modem.
CAUTION:
Avoid damage to your equipment. Only use the AC power cord that is
provided with your cable modem.
2 CABLE – F-Connector connects to an active cable signal from your cable service
provider.
3 USB – 12 Mbps USB port connects to the USB port on your PC.
4 ETHERNET – RJ-45 Ethernet port connects to the Ethernet port on your PC or
your home network.
5 TELEPHONE 1 / 2 – RJ-11 telephone ports connect to home telephone wiring to
conventional telephones or fax machines.
6 REBOOT EMTA – Pressing this switch reboots the EMTA. Pressing this switch
for more than ten seconds resets the device to factory default values and reboots
the EMTA.
CAUTION:
The Reboot EMTA button is for maintenance purposes only. Do not use
unless instructed to do so by your cable or telephone service provider.
Doing so may cause you to lose any cable modem settings you have
selected.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco DPX2213 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco DPX2213 in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info