604997
35
Zoom out
Zoom in
Previous page
1/52
Next page
WebSTAR DPX2203C and EPX2203C VoIP Cable Modem User’s Guide
34
Installation Diagram
The following diagram illustrates one of the various connection options that are
available to you.
CABLE
USB ETHERNET
TELEPHONY
LINE1 LINE2 15VDC
POWER
RESET
CABLE
USB ETHERNET
TELEPHONY
LINE1 LINE2 15VDC
POWER
RESET
CABLE
USB ETHERNET
TELEPHONY
LINE1 LINE2 15VDC
POWER
RESET
Power
Supply
Cable-Ready TV,
VCR, or Set-Top
Converter
PC
Ethernet
Cable
RF
Cable
RF
Cables
Cable
Splitter
T11700
Power Supply
BYPASS
VOLñ VOL+
CH+
CHñ
MENU GUIDE INFO A/B
POWER
Home Telephone Wiring
Line 1
Home Telephone Wiring
Line 2
To install the cable modem for telephone service
1. Connect a telephone, fax machine, or analog modem to each of the
appropriate RJ-11 ports on the cable modem.
Notes:
The cable modem provides one line of telephone service on each of the
RJ-11 connectors.
Service must be set up and enabled by the cable telephone service
provider.
The two center conductors (pins 3 and 4) on the RJ-11 connector
provide electrical connections to directly attached telephone devices or
to a permanently installed in-home telephone wiring network.
The telephone port labeled Line 1 also supports multi-line telephone
devices. Line 1 is supported on pins 3 and 4, and Line 2 is supported on
pins 2 and 5.
The use of telephones that require electrical connections to other RJ-11
pins requires an adapter.
2. After all telephone connections are complete, insert the AC power adapter
cord into the DC power connector on the back of the cable modem, and then
plug the power adapter into an AC power source.
3. Connect the active RF coaxial cable to the CABLE connector on the back of
the cable modem. The cable modem begins an automatic search to locate
and sign on to the network that provides the telephone service. This process
may take up to 5 minutes. The modem will be ready for use when the
CABLE light on the front panel stops blinking and illuminates continuously.
Note: Use an optional cable signal splitter to add a TV, a DHCT or set-top
converter, or a VCR.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco DPX2203C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco DPX2203C in the language / languages: English as an attachment in your email.

The manual is 2,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info