Manual Cisco DPX2203C (page 18 of 52) (English)

604997

Zoom out

Zoom in

1/52

How Do I Configure TCP/IP Protocol?

To configure Macintosh systems

1. Click the Apple icon in the upper left corner of the Finder. Scroll down to

Control Panels, and then click TCP/IP.

2. Click Edit on the Finder (gray bar) at the top of the screen. Scroll down to

the bottom of the menu, and then click User Mode.

3. Click Advanced in the User Mode window, and then click OK.

4. Click the Up/Down selector arrows located to the right of the Connect Via

section of the TCP/IP window, and then click Using DHCP Server.

5. Click Options in the TCP/IP window, and then click Active in the TCP/IP

Options window.

Note: In some cases, the Load only when needed option will not

appear. If it appears, select the option. A check mark appears in the

option.

6. Verify that the Use 802.3 option located in the upper right corner of the

TCP/IP window is unchecked. If there is a check mark in the option,

deselect the option, and then click Info in the lower left corner.

7. Is there a Hardware Address listed in this window?

• If yes, click OK. To close the TCP/IP Control Panel window, click File,

and then scroll down to click Close. You have completed this

procedure.

• If no, you must power off your Macintosh.

8. With the power off, simultaneously press and hold down the Command

(Apple), Option, P, and R keys on your keyboard. Keeping those keys

pressed down, power on your Macintosh but do not release these keys

until you hear the Apple chime.

9. Continue pressing these keys for at least three chimes, then release the

keys and allow the computer to restart.

10. When your computer fully reboots, repeat steps 1 through 7 to verify that

all TCP/IP settings are correct. If your computer still does not have a

Hardware Address, contact your authorized Apple dealer or Apple

technical support center for further assistance.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cisco DPX2203C in the language / languages: English as an attachment in your email.

The manual is 2,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cisco DPX2203C Manual

Product: