604997
10
Zoom out
Zoom in
Previous page
1/52
Next page
Front Panel Description
9
Front Panel Description
The front panel of your cable modem provides status LEDs that indicate how well and at what state your cable
modem is operating. See Front Panel LED Status Indicator Functions, later in this guide, for more information
on front panel LED status indicator functions.
POW
ER
R
ECEIVE
DATA
SEND
CABLE
PC
LINE 1
TELEPHONE
LINE 2
BATTER
Y
LOW
REPLACE
BATTER
Y
by Scientific-Atlanta, Inc.
21 3 4 5 6 7 8 9
T11671
1 POWER—Illuminates solid green to indicate that AC power is being applied to
the cable modem. AC power must be available to recharge the battery.
2 RECEIVE DATA—Blinks to indicate that the cable modem is receiving data from
the cable network
3 SEND DATA— Blinks to indicate that the cable modem is sending data to the
cable network
4 CABLE—Illuminates solid green when the cable modem is registered on the
network and fully operational. This indicator blinks to indicate one of the following
conditions:
The cable modem is booting up and not ready for data
The cable modem is scanning the network and attempting to register
The cable modem has lost registration on the network and will continue
blinking until it registers again
5 PC—Illuminates solid green to indicate that an Ethernet/USB carrier is present
and blinks to indicate that Ethernet/USB data is being transferred between the
PC and the cable modem
6 LINE 1—Illuminates solid green when telephone line 1 is in use
7 LINE 2—Illuminates solid green when telephone line 2 is in use
8 LOW BATTERY—Illuminates to indicate that approximately 20 percent of charge
is remaining in the battery.
9 REPLACE BATTERY—Illuminates to indicate that the battery could not be fully
charged. While the battery may be able to provide some backup power, it should
be replaced to restore maximum capacity.
Notes:
After the cable modem is successfully registered on the network, the POWER
(LED 1) and CABLE (LED 4) LEDs illuminate continuously to indicate that the
cable mode is active and fully operational.
LEDs may behave differently when the cable modem is running on battery power
(without AC power). Most LEDs are disabled if the unit is operating on battery
power. In this mode, the POWER and CABLE LEDs blink to indicate that the unit
is operating under battery power but AC power has failed.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco DPX2203C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco DPX2203C in the language / languages: English as an attachment in your email.

The manual is 2,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info