604994
35
Zoom out
Zoom in
Previous page
1/40
Next page
34 WebSTAR Model DPX213 VoIP DOCSIS Cable Modem User's Guide 4001231 Rev A
Install the Cable Modem to Provide Telephone Service, Continued
Installing the Cable Modem
Follow these steps for proper cable modem installation.
1. Connect a telephone, fax machine, or analog modem to each of the
appropriate RJ-11 ports on the cable modem.
Notes:
The cable modem provides one line of telephone service on each of the RJ-
11 connectors.
Service must be set up and enabled by the cable telephone service
provider.
The two center conductors on the RJ-11 connector provide electrical
connections to directly attached telephone devices or to a permanently
installed in-home telephone wiring network.
The use of telephones that require electrical connections to other RJ-11
pins requires an adapter.
2. After all telephone connections are complete, insert the AC power adapter
cord into the DC power connector on the back of the cable modem, and then
plug the power adapter into an AC power source.
3. Connect the active RF coaxial cable to the CABLE IN connector on the back of
the cable modem.
Note: Use an optional cable signal splitter to add a TV, a DHCT or set-top
converter, or a VCR.
4. The cable modem begins an automatic search to locate and sign on to the
network that provides the telephone service.
Note: This process may take up to 5 minutes. The modem will be ready for
use when the CABLE indicator on the front panel stops blinking and
illuminates continuously.
5. Test your telephone service by lifting the receiver of each attached telephone
to verify that dial tone can be heard and that you can make and receive
telephone calls.
Note: The Line 1 or the Line 2 front panel LED status indicator also
illuminates depending on which line the telephone is connected to.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco DPX213 Webstar at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco DPX213 Webstar in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info