Manual Cisco DPX2100 WebSTAR (page 19 of 26) (English)

604977

Zoom out

Zoom in

1/26

Having Difficulty?

Common Troubleshooting Issues

I don’t understand the front panel status indicators.

See Front Panel Status Indicator Functions, later in this guide for more

detailed information on the front panel status indicator operation and function.

The modem does not register an Ethernet connection.

 Verify that your computer has a 10/100BaseT Ethernet card and that the

Ethernet driver software is properly installed. If you purchase and install an

Ethernet card, follow the installation instructions very carefully.

 Verify the status of the front panel status indicator lights.

The modem does not register an Ethernet connection after connecting to a hub.

If you are connecting multiple PCs to the cable modem, you should first connect

the modem to the up-link port of the hub. The LINK LED of the hub will illuminate

continuously.

The modem does not register a cable connection.

 The modem works with a standard 75-ohm RF coaxial cable. If you are using

a different cable, your cable modem will not function properly. Contact your

cable service provider to determine whether you are using the correct cable.

 Verify that you have followed the procedure in How Do I Renew the IP

address for Windows 95, 98, 98SE, and ME PCs, later in this guide.

 Your NIC card or USB interface may be malfunctioning. Refer to the

troubleshooting information in the NIC or USB documentation.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cisco DPX2100 WebSTAR in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cisco DPX2100 WebSTAR Manual

Product: