604984
19
Zoom out
Zoom in
Previous page
1/24
Next page
19
Renewing the IP Address for Windows 2000
Follow these steps to renew the IP address on your
PC if you are using Windows 2000.
1. Click Start, and then click Run to open the
Run window.
2. Type cmd in the Open field, and click OK to
execute the cmd command. A DOS window
appears.
3. At the DOS prompt, type ipconfig and press
Enter. A list of IP addresses appears.
4. Type ipconfig /release and press Enter.
5. Type ipconfig /renew and press Enter.
6. Type exit to close the DOS window and
return to Windows.
Renew the IP Address, continued
Renewing the IP Address for Macintosh
Follow these steps to renew the IP address on your
Macintosh computer.
1. Click the Apple icon in the upper left corner of
the Finder. Scroll down to Control Panels,
and then click TCP/IP. The TCP/IP window
appears.
2. In the Configure field of the TCP/IP window,
select Using DHCP Server.
3. Click the Close icon in the uper left corner of
the TCP/IP window. The save changes to the
current configuration? message box appears.
4. Click Save in the save changes message box.
5. Wait approximately 2 or 3 minutes, and repeat
step 1 to verify the IP address. If there is no IP
address, contact your local authorized Apple
dealer or Apple technical support center.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco DPX130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco DPX130 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info