497627

Cisco DPC3212 Manual

27
Zoom out
Zoom in
Previous page
1/40
Next page
Part Number 4021203 Rev A 27
Installing USB Drivers
Installing USB Drivers
Your IP cable modem features multiple networking interfaces that allow you to
connect consumer electronic devices to your home network. USB 1.1 is one of the
technologies that enables Microsoft Windows-based PCs to connect to the home
network.
Important: Due to the inherent speed limitations of the technology, USB 1.1 is not
the optimal interface for high-speed networking. The USB 1.1 port should only be
used when there is no other interface available on your PC for connecting to the
network.
This section contains instructions for installing USB drivers if your PC is equipped
with a USB interface and a Microsoft Windows 2000, XP, or Vista operating system.
The USB driver installation procedures are different for each operating system.
Follow the appropriate instructions in this section for your operating system.
Note: If you are not using the USB interface, skip this section.
Installing USB Drivers on Windows 2000 Systems
1 Insert the USB Cable Modem Driver Installation Disk into the CD-ROM drive
of your PC.
2 Make sure the power is connected to your cable modem and that the
POWER
LED status indicator on the front panel of the cable modem illuminates solid.
3 Connect the USB cable to your computer's USB port. Then, connect the other end
of the USB cable to the
USB port on the cable modem.
4 Click
Next in the Found New Hardware Wizard window.
5 Select
Search for a suitable driver for my device (recommended) in the Found
New Hardware Wizard window, and then click
Next.
6 Select
CD-ROM drives in the Found New Hardware Wizard window, and then
click
Next.
7 Click
Next in the Found New Hardware Wizard window. The system searches
for the driver file for your hardware device.
8 After the system finds the USB driver, the Digital Signature Not Found window
opens and displays a confirmation message to continue the installation.
9 Click
Yes to continue the installation. The Found New Hardware Wizard
window reopens with a message that the installation is complete.
10 Click
Finish to close the Found New Hardware Wizard window. The USB
drivers are installed on your PC, and your USB devices are ready for use.
11 Try to access the Internet. If you cannot access the Internet, go to
Having
Difficulty?
(on page 34). If you still cannot access the Internet, contact your
service provider for further assistance.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco DPC3212 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco DPC3212 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cisco DPC3212

Cisco DPC3212 User Manual - German - 40 pages

Cisco DPC3212 User Manual - Dutch - 42 pages

Cisco DPC3212 User Manual - French - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info