Manual Cisco DPC3208 (page 44 of 70) (English)

604963

Zoom out

Zoom in

1/70

Chapter 2 Installing the DOCSIS Cable Modem

20 4027620 Rev B

6 Locate the AC power adapter provided with your cable modem. Connect the

barrel connector end of the power adapter into the power input on the back of

the cable modem. Then, plug the AC power adapter into an AC outlet to power-

up the cable modem.

Note: If your Cable Modem is equipped with a power switch (located on the

back panel), make sure that the switch is in the ON position to power-up the

Cable Modem.

The cable modem will perform an automatic search to locate and sign on to the

broadband data network. This process may take up to 2-5 minutes. The cable

modem will be ready for use when the POWER, DS, US and ONLINE LEDs on

the front panel of the cable modem stop blinking and remain on continuously.

7 Plug in and power on your PC and other home network devices. The LINK LED

on the cable modem should be on or blinking.

8 At this point, the installation is complete, and you can begin surfing the Internet.

Note: If your PC does not have Internet access, refer to How Do I Configure

TCP/IP Protocol? (on page 32) for information on how to configure your PC for

TCP/IP. For Internet devices other than PCs, refer to the DHCP or IP Address

configuration section of the User Guide or Operations Manual for those devices.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cisco DPC3208 in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cisco DPC3208

Cisco DPC3208 User Manual - German - 74 pages

Cisco DPC3208 User Manual - Dutch - 72 pages

Cisco DPC3208 User Manual - French - 68 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cisco DPC3208 Manual

Product: