300214

Cisco cp 7912 Manual

7
Zoom out
Zoom in
Previous page
1/12
Next page
UMR Information Technology Quick Start Guide: Cisco 7912 IP Telephone – 7
Place a Call on Hold
Step 1) While on the call, press the Hold button (has an octagon symbol, left of the Up/Down scroll
keys: ).
Step 2) To return to a call, press Hold button again.
Placing Conference Calls
To establish a conference call for the existing call.
Step 1) Press the More soft key and then press the ConFrn soft key (this will automatically select a
new line and place the other party on hold).
Step 2) Dial the 4-digit extension or 3 + (local or long distance number).
Step 3) When the party answers, press the ConFrn soft key again and the party will be added to the
conference call.
Step 4) Repeat steps 1 through 3 to add additional parties to the conference call.
Conference Call Options
Notes: To place a conference call on hold, press the Hold soft key (the other parties can talk among
themselves but they cannot hear you).
To place a conference call on speakerphone, press the SPEAKER button.
To mute a conference call on speakerphone, press the MUTE button to turn off the microphone.
Items to Consider for Conference Calls
§ Once the conference call initiator disconnects, no new conferees can be added
§ When you place a call on hold, a beeping tone is generated every few seconds. Consider using the
mute instead of hold to avoid disrupting other callers.
§ To abandon the addition of a conferee, press the Line button.
INITIATING a Meet-Me Conference Call
In a Meet-Me conference call, participants dial a pre-arranged conference number at a specific time to
meet on a call.
Step 1) Contact the network administrator and obtain a meet-me conference number.
Step 2) Lift the Handset and press the more soft key once to display the Meet-Me tab.
Step 3) Press the Meet-Me soft key.
Step 4) Dial the Meet-Me conference number obtained from the network administrator.
JOINING a Meet-Me Conference Call
Step 1) Dial the conference number provided by the Meet-Me conference initiator.
Note: You will be connected to the conference once the initiator has dialed in and established the Meet-
Me call.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco cp 7912 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco cp 7912 in the language / languages: English as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info