301454
13
Zoom out
Zoom in
Previous page
1/18
Next page
13
Place a Call from Call History
To place a call to a number in the call history list:
1. Use the Navigation button to scroll through the Call History list.
2. Use Select to select a phone number. The digits will appear on the phone display.
To dial the number as it appears on the phone display:
Press Dial.
To edit the number on the phone display before dialing:
1. Press EditDial to place the cursor at the beginning of the number on the phone display.
2. Use the keypad to edit the digits as needed. Use delChr to erase digits that you enter incorrectly.
3. Press Dial to place the call.
Clear Call History
To clear all numbers in the directory histories
Press Clear.
Note The Clear soft key clears all call history lists. Selective clearing of call history lists is not supported.
Use the Intercom Feature
Cisco Unified Communications Manager Express supports intercom functionality for one-way and press-to-answer voice
connections using a dedicated pair of intercoms on two phones that speed-dial each other.
To use the intercom feature:
1. Press the Speaker button and get dial tone.
2. Press the speed dial key or dial the directory number to start the intercom call.
Note The called Cisco Unified IP phone automatically answers the call in speakerphone mode with mute activated or
deactivated depending on configuration. The phone beeps to alert the recipient to the incoming call.
To respond to an intercom call:
If Mute key is lit, Press the Mute button, or lift the handset.
If Mute key is not lit, reply to caller hands free.
Activate Do Not Disturb
For visual call alerting and information without audible ringing, use Do Not Disturb (DnD). Calls receive normal
call-forward-busy and no-answer treatment.
To activate the Do-Not-Disturb feature:
1. Press DnD.
2. A text message indicates that the phone is in Do-Not-Disturb mode.
Note Pressing the DnD soft key while the phone is ringing immediately forwards the call to the call-forward destination set
on the phone. If the call-forward destination is not set, pressing the DnD soft key disables the ringer.
To deactivate the Do-Not-Disturb feature, repeat Step 1.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco cp 521g at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco cp 521g in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info