650695

Cisco Cisco SPA112 VoIP Manual

133
Zoom out
Zoom in
Previous page
1/136
Next page
Advanced Options for Voice Services
Configuring Dial Plans
Administration Guide 144
1
Dial Plan Timer (Off-Hook Timer)
You can think of the Dial Plan Timer as “the off-hook timer.” This timer starts counting when
the phone goes off hook. If no digits are dialed within the specified number of seconds, the
timer expires and the null entry is evaluated. Unless you have a special dial plan string to allow
a null entry, the call is rejected. Default setting: 5
Syntax for the Dial Plan Timer
(Ps<:n>| dial plan )
• s: The number of seconds; if no number is entered after P, the default timer of 5
seconds applies.
• n: (optional): The number to transmit automatically when the timer expires; you can
enter a valid number. No wildcard characters are allowed because the number will be
transmitted as shown. If you omit the number substitution, <:n>, then the user hears a
reorder (fast busy) tone after the specified number of seconds.
Examples for the Dial Plan Timer
NOTE Red text is used to highlight the elements that are explained in the examples.
• Allow more time for users to start dialing after taking a phone off hook.
(P9 | (9,8<:1408>[2-9]xxxxxx | 9,8,1[2 9]xxxxxxxxx | 9,8,011xx. | 9,8,xx.|[1-8]xx)
P9 After taking a phone off hook, a user has 9 seconds to begin dialing. If no digits are
pressed within 9 seconds, the user hears a reorder (fast busy) tone. By setting a longer
timer, you allow more time for users to enter the digits.
xx This code allows the entry of one or more digits. Do not use a single x, allowing 0
or more digits. This setting will produce unwanted results especially if you are
deploying timers.
• Create a hotline for all sequences on the System Dial Plan
(P9<:23> | (9,8<:1408>[2-9]xxxxxx | 9,8,1[2-9]xxxxxxxxx | 9,8,011xx. | 9,8,xx.|[1-
8]xx)
P9<:23> After taking the phone off hook, a user has 9 seconds to begin dialing. If no
digits are pressed within 9 seconds, the call is transmitted automatically to extension
23.
… 133 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info