650695
127
Zoom out
Zoom in
Previous page
1/136
Next page
Advanced Options for Voice Services
Configuring Dial Plans
Administration Guide 138
1
STEP 5 If faxes fail consistently, capture a copy of the configuration as described below. You can then
send this file to Technical Support.
a. In your web browser, enter the path for the configuration file:
http://<ATA_Local_IP_Address>/admin/config.xml&xuser=
<admin_user>&xpassword=<admin_password>
b. On the File menu, choose Save As, and save the file with a filename such as
MyConfiguration.xml.
STEP 6 To enable logging, go to the Voice > System page, and set the IP address of your syslog and/or
debug server. Set the Debug Level to 3. For more information, see System, page 47.
NOTE: You can also capture data using a sniffer trace.
STEP 7 Identify the type of fax machine connected to the ATA.
STEP 8 Contact technical support:
If you are an end user of VoIP products, contact the reseller or service provider that
supplied the equipment.
If you are an authorized Cisco partner, contact Cisco technical support. For contact
options, see: www.cisco.com/go/sbsc
Configuring Dial Plans
Dial plans determine how dialed digits are interpreted and transmitted. They also determine
whether the dialed number is accepted or rejected. You can use a dial plan to facilitate dialing
or to block certain types of calls such as long distance or international. This section includes
information that you need to understand dial plans, as well as procedures for configuring your
own dial plans.
To edit a dial plan, click Voice on the menu bar, and then click Line 1 or Line 2 in the
navigation tree. Scroll down to the Dial Plan section, and then enter the digit sequences in the
Dial Plan field. For more information and examples, see the following topics:
Digit Sequences
Acceptance and Transmission of the Dialed Digits
Dial Plan Timer (Off-Hook Timer)
Interdigit Long Timer (Incomplete Entry Timer)
127


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info