650695
121
Zoom out
Zoom in
Previous page
1/136
Next page
Using the IVR for Administration
Cisco SPA100Series Administration Guide 132
1
If the menu is inactive for more than one minute, the IVR times out. You will need to
re-enter the IVR menu by pressing the star key four times: ****. Your settings take
effect after you hang up the telephone or exit the IVR. The ATA may reboot at this
time.
To enter the decimal points in an IP address, press the * (star) key.
For example, to enter the IP address 191.168.1.105, perform the following tasks:
–Press these keys: 191*168*1*105
–Press the # (pound) key to indicate that you have finished entering the IP address.
–Press 1 to save the IP address or press the * (star) key to cancel your entry and
return to the main menu.
IVR Actions
IVR Action Menu
Option
Choices and Instructions
Enter IVR Menu ****
Check Internet Addressing
Method
100
Set Internet Addressing
Method
101 DHCP: 0
Static IP: 1
PPPoE: Press 2
Check Internet IP Address
(INTERNET port)
110
Set Static IP Address
(INTERNET port)
111 Enter the IP address by using numbers on
the telephone key pad. Use the * (star) key
when entering a decimal point.
Note: This option is available only after you
choose Static IP as the Internet Connection
Type, through option 101.
Check Network Mask 120
121


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info