650695
101
Zoom out
Zoom in
Previous page
1/136
Next page
Administration Settings
Management
Cisco SPA100Series Administration Guide 111
1
SNMP
Use the Administration > Management > SNMP page to set up Simple Network Management
Protocol (SNMP) for the ATA.
SNMP is a network protocol that allows network administrators to manage, monitor, and
receive notifications of critical events as they occur on the network. The ATA supports
SNMPv2 and SNMPv3. It acts as an SNMP agent that replies to SNMP commands from
SNMP Network Management Systems. It supports the standard SNMP get, next, and set
commands. It also generates SNMP traps to notify the SNMP manager when configured alarm
conditions occur. Examples include reboots, power cycles, and INTERNET (WAN) events.
Enter the settings as described below. After making changes, click Submit to save your
settings, or click Cancel to redisplay the page with the saved settings.
Settings for SNMPv2
Settings for SNMPv3
Field Description
Enabled, Disabled Click Enabled to enable this feature, or click Disabled to disable
it. The default setting is Disabled.
Trusted IP Choose Any to allow access from any IP address (not
recommended). Click Address to specify the IP address and
subnet mask of a single SNMP manager or trap agent that can
access the ATA through SNMP.
Get/Trap Community Enter a community string for authentication for SNMP GET
commands. The default value is public.
Set Community Enter a community string for authentication for SNMP SET
commands. The default value is private.
Field Description
Enabled, Disabled Click Enabled to enable this feature, or click Disabled to disable
it. The default setting is Disabled.
R/W User Enter the user name for SNMPv3 authentication. The default
value is v3rwuser.
101


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info