650695
98
Zoom out
Zoom in
Previous page
1/136
Next page
Administration Settings
Management
Cisco SPA100Series Administration Guide 108
1
Cisco SPA122 Web Access fields
Cisco SPA122 Remote Access fields
Field Description
Admin Access This feature controls access to the configuration utility from
devices that are connected via the ETHERNET (LAN) port.
Click Enabled to enable this feature, or click Disabled to disable
it. The default setting is Enabled. If you administer and
configure the ATA from a computer that is connected to the
LAN, this feature must be enabled.
Web Utility Access Select the protocol to use for access to the configuration utility
from a device on the WAN. Choose HTTP and/or HTTPS. For
secure Internet access, select HTTPS. The default value is
HTTP.
Field Description
Remote Management Allows access to the configuration utility from a device that is
on the WAN side of the ATA. For example, you could connect
from another subnet in your office or from your home computer.
Click Enabled to enable this feature, or click Disabled to disable
it. The default setting is Disabled. The other fields in this section
of the page are available only if you enable this feature.
If you attempt to enable this feature while using the default
administrator login credentials, you will be prompted to change
the credentials. Click OK to acknowledge the warning message.
Use the Administration > Management > User List page to
change administrator password. For more information, see User
List (Password Management), page 112.
98


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info