650695

Cisco Cisco SPA112 VoIP Manual

17
Zoom out
Zoom in
Previous page
1/136
Next page
1
Cisco SPA100 Series Administration Guide 23
Quick Setup for Voice over IP Service
The Quick Setup page is displayed automatically when you first log on ATA. You can use this
page to quickly configure connectivity to your provider’s Voice over IP network for your
analog phones.
NOTE Connecting to your service provider’s network requires Internet connectivity. With the default
network settings, your ATA should have Internet connectivity when you connect a cable from
the WAN port of the ATA to a port on your router or broadband network device. For more
information, see Internet Settings, page 26.
STEP 1 For Line 1 and Line 2, specify the settings for the phone services to be used by a analog (FXS)
phones or fax machines that are connected to the PHONE1 and PHONE2 ports.
• Proxy: Enter the domain name or URL of the service provider’s proxy server.
• Display Name: Enter the name that you want to use to identify your account. This name
typically is used as your Caller ID name.
• User ID: Enter the user ID that is required to log in to your Internet account.
• Password: Enter the password that is required to log in to your Internet account.
• Dial Plan in (Line section only): Keep the default settings (recommended) or edit the
dial plan to suit your site. For more information, see Configuring Dial Plans, page 138.
STEP 2 Click Submit to save your settings. The voice service will restart.
STEP 3 To verify your progress, perform the following tasks:
a. Click Voice in the menu bar, and then click Info in the navigation tree. Verify that the
Registration State is Registered for Line 1 and Line 2 Status.
If the line is not registered, you may need to refresh the browser several times because it can
take a few seconds for the registration to complete. Also verify that your Internet Settings,
including DNS server settings, are configured according to the information from your ISP.
For more information, see Internet Settings, page 26.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info