Manual Cisco Cisco SPA112 VoIP adapter (2 x FXS, LAN) (page 5 of 12) (English)

650694

Zoom out

Zoom in

1/12

Cisco SPA100 Series Analog Telephone Adapters 5

Configuration and Management of the ATA

You can use the web-based configuration utility to set up your ATA. You

also can use the built-in Interactive Voice Response (IVR) system.

Using the Web-Based Configuration Utility

STEP 1 Connect your computer to the same subnet as the ATA. For

example, if the ATA is connected to a LAN port on your router, also

connect your computer to a LAN port on your router.

Note: On SPA122, you can connect your computer to the

ETHERNET (Yellow) port of the ATA.

STEP 2 Power on your computer.

NOTE: Make sure your computer’s Ethernet adapter is set to obtain

an IP address automatically. For more information, refer to the Help

for your operating system.

STEP 3 Start a web browser on your computer.

STEP 4 In the Address bar, enter the IP address of the ATA.

• SPA112: Use the ATA’s IVR or your router’s configuration utility

to find the dynamically assigned IP address of the ATA. For

information about the IVR, see Using the IVR for

Administration, page 6.

• SPA122: In the Address bar, enter: 192.168.15.1

Note: 192.168.15.1 is the default local IP address of the ATA.

STEP 5 To log in for the first time, enter the default username, admin, and

the default password, admin. The password is case sensitive.

STEP 6 Enter the Connection Type and settings required by your Internet

Service Provider. Types include DHCP (the default option),

Static IP, and PPPoE (required for most DSL service). After

entering these settings, click Submit to establish your

Internet connection.

STEP 7 Use the menus to configure your settings, as needed. For more

information, see the ATA Administration Guide. (Documentation

links are provided in Where to Go From Here, page 11.)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP adapter (2 x FXS, LAN) in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cisco Cisco SPA112 VoIP adapter (2 x FXS, LAN) Manual

Product: