497619
64
Zoom out
Zoom in
Previous page
1/74
Next page
4-28
Cisco ASA 5500 Series Hardware Installation Guide
78-17989-01
Chapter 4 Maintenance and Upgrade Procedures
Upgrading Memory in the Adaptive Security Appliance
Step 8 Pull the latches away from the DIMM at both ends and release the DIMM from the socket. See
Figure 4-29.
Step 9 When both ends of the DIMM are released from the socket, grasp the ends of the DIMM with your thumb
and forefinger and pull the DIMM completely out of the socket.
Step 10 Place the DIMM in an antistatic container to protect it from ESD damage.
Figure 4-29 Releasing the DIMM Latches
Installing the DIMM
To install the memory module, perform the following steps:
Step 1 Make sure that both latches on the DIMM connector are open.
Step 2 Remove a new DIMM from the antistatic container.
The DIMM is designed in such a way that the connector will fit only one way.
Step 3 Hold the DIMM component side up, with the connector edge away from you. Line up the notch in the
connector traces with the notch in the socket on the board.
Step 4 Carefully insert the connector edge into the socket and firmly press the DIMM into the socket until both
latches rotate to the close position against the DIMM.
Note For memory upgrade in the Cisco ASA 5510 with four memory sockets, use slot 1 - P13 and note
that only one slot must be populated at all times.
1
1
2
203845
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco ASA 5510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco ASA 5510 in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info