497619
23
Zoom out
Zoom in
Previous page
1/74
Next page
2-5
Cisco ASA 5500 Series Hardware Installation Guide
78-17989-01
Chapter 2 Preparing for Installation
General Site Requirements
The following chassis models can have either an AC or DC power supply: Cisco ASA 5510,
Cisco ASA 5520, Cisco ASA 5540, and Cisco ASA 5550.
Observe the following considerations:
Check the power at the site before installing the chassis to ensure that the power is “clean” (free of
spikes and noise). Install a power conditioner if necessary, to ensure proper voltages and power
levels in the source voltage.
Install proper grounding for the site to avoid damage from lightning and power surges.
In a chassis equipped with an AC-input power supply, use the following guidelines:
The chassis does not have a user-selectable operating range. Refer to the label on the chassis for
the correct AC-input power requirement.
Several styles of AC-input power supply cords are available; make sure you have the correct
style for your site.
Install an uninterruptible power source for your site, if possible.
Install proper site grounding facilities to guard against damage from lightning or power surges.
In a chassis equipped with a DC-input power supply, use the following guidelines:
Each DC-input power supply requires dedicated 3-5 amp service.
For DC power cables, we recommend a minimum of 14 AWG wire cable.
The DC return connection to this system is to remain isolated from the system frame and
chassis.
You will also need to provide power to the switch with the appropriate AC power cord for your location.
Table 2-1 lists the power cords that are used with the AC power supply.
Table 2-1 AC-Input Power Cord Options
Locale Part Number Length Plug Rating Plug Type
300 W AC Power Supply
Appliance Coupler
North America CAB-AC (72-0259) 8.2 ft (2.5 m) 125 VAC, 10 A
Australia, CAB-ACA
(72-0746-01)
8.2 ft (2.5 m) 250 VAC, 10 A
Europe (except
Italy)
CAB-ACE (72-0460) 8.2 ft (2.5 m) 250 VAC, 10 A
120352
120354
120356
120357
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco ASA 5510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco ASA 5510 in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info