The Cisco 891, Cisco 892, and Cisco 892F come with three removable dipole antennas that can be
replaced using the Cisco approved antenna extenders listed in Table1-52.
NoteCisco supports only the antennas listed in Table1-52 with the Cisco 890 series dual-band radio module.
Single-band
802.11b/g/n
radio module
Cisco 880 series routers
with embedded WLAN
antennas
2.4 GHz100 Mb/s per radio,
up to 200 Mb/s
total
Autonomous and
unified
Three embedded,
omnidirectional
antennas: 2 dBi at
2.4 GHz
Dual-band
802.11a/n and
802.11b/g/n
radio modules
2.4 GHz
and
5 GHz
Three embedded,
dual-band,
omnidirectional
antennas: 2 dBi at
2.4 GHz and 5 dBi at
5 GHz
Dual-band
simultaneous
802.11a/n and
802.11b/g/n
radio modules
Cisco 8902.4 GHz
and 5 GHz
100 Mb/s per radio,
up to 200 Mb/s
total
Autonomous and
unified
Three dual-band,
removable,
2.4-GHz/5-GHz
omnidirectional dipole
RP-TNC antenna
2
1.Actual data rate is highly dependent on your wireless environment.
2.The antennas require some minor installation. They must be screwed onto the RP-TNC antenna connectors on the I/O side of the chassis. See the following
document on Cisco.com for feature information: http://www.cisco.com/en/US/docs/routers/access/wireless/hardware/notes/antdip.html
Table 1-51Wireless Device Radios and Antennas
Radio ModulePlatformRadio Band
Maximum Data
Throughput
1
ModeAntenna
Table 1-52Cisco Antennas Supported on the Cisco890 Series ISRs
Cisco Part NumberAntenna TypeMaximum GainDescription
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Cisco 890 series at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Cisco 890 series in the language / languages: English as an attachment in your email.
The manual is 15,56 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.