605003

Cisco 820 Series Manual

6
Zoom out
Zoom in
Previous page
1/10
Next page
6
Cisco 820 Series and SOHO Series Routers Cabling and Setup Quick Start Guide
78-13937-04
4: Connect a Cisco 827-4V Router to a Phone or Fax
4: Connect a Cisco 827-4V Router to a Phone or Fax
If you have a Cisco 827-4V router, you can connect analog telephones or fax machines to your router.
Use the cables provided with these devices.
The gray PHONE 1, 2, 3, and 4 ports are RJ-11 connectors. If you are outside North America, you must
buy and attach adapters that allow telephones or faxes to be connected to the RJ-11 connectors. In some
countries, these adapters need additional electronics to convert the telephones or faxes to work properly
with the router phone ports. For example, in the United Kingdom, you must buy an adapter that also
provides a master socket, which causes incoming calls to ring the connected devices. For information on
recommended master sockets, see the Cisco 827 and SOHO 77 Routers Hardware Installation Guide.
Follow the steps in Figure 4 on page 6 to connect a telephone or a fax machine to a Cisco 827-4V router.
Caution Do not connect the router telephone ports to the telephone wall jack. These ports are not meant for direct
connection to the public network. This connection can damage your router.
Figure 4 Connecting a Telephone to a Cisco 827-4V Router
1 Cisco 827-4V router 3 Analog telephone
2 Connect telephone cable to gray PHONE port 1, 2, 3, or
4. If you are connecting only one devie, use
PHONE port 1.
4 Connect other end of cable to telephone or fax machine.
ETHERNET
TO HUB
TO PC
+5,+12,-12,-24,-71 VDC
1
CONSOLE
Model Cisco 827-4V
ADSL
PHONE
2
1
4
3
Cisco 827-4V router
1. Connect telephone cable to
gray PHONE port 1, 2, 3, or 4.
If you are connecting only one
device, use PHONE port 1.
2. Connect other end of
cable to telephone or
fax machine.
Analog telephone
65597
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco 820 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco 820 Series in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info