605005
7
Zoom out
Zoom in
Previous page
1/28
Next page
7
Figure 4 WIC-4ESW
4
WIC 1 slot
10
10/100-Mbps Fast Ethernet port
5
Power switch
11
FDX, 100, and LINK LEDs
6
Power socket
12
WIC 0 OK LED
Table 1 Back Panel Connectors
Connector/Slot Label/Color Description
Fast Ethernet port 10/100 ETHERNET (yellow) Connects the router to the local Ethernet network through this
port. This port autosenses the speed (10 Mbps or 100 Mbps) and
duplex mode (full- or half-) of the device to which it is connected
and then operates at the same speed and duplex mode.
Auxiliary port AUX (black) Connects to a modem for remote configuration with Cisco IOS
software.
Console port CONSOLE (blue) Connects to a terminal or PC for local configuration using
Cisco IOS software.
WIC-4ESW No label Supports interface card with four 10/100-BASE-TX Ethernet switch
ports. See Figure 4.
HWIC-CABLE-D-2 No label Supports one Cisco cable WIC. See Figure 5.
Table 2 Back Panel LEDs
LED Label Color Description
WIC0 OK Green On when the WIC is correctly installed in the card slot.
Two LEDS are associated with the WIC-4ESW: the right LED labeled LNK and the left
LED labeled ACT. The LNK (physical layer link) LED is on when the Cisco IOS software
recognizes the switch and the connection is up. The ACT (activity) LED indicates that
data is being transmitted or received on the slot.
FDX Green On solid—Ethernet port is operating in full-duplex mode.
Off—Ethernet port is operating in half-duplex mode.
100 Green On solid—Ethernet port is operating at 100 Mbps.
Off—Ethernet port is operating at 10 Mbps.
LINK Green On when the Ethernet link is up.
MOD OK Green On when the VPN hardware encryption module is installed and recognized by the Cisco
IOS software.
WIC1 OK Green On when the WIC is correctly installed in the card slot.
95777
1x
ACT
LNK
2x
ACT
LNK
3x
ACT
LNK
4x
ACT
LNK
WIC
4ESW
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco 815 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco 815 in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cisco 815

Cisco 815 Installation Guide - English - 86 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info