605006
25
Zoom out
Zoom in
Previous page
1/52
Next page
2-7
Cisco 806 Router and SOHO 71 Router Hardware Installation Guide
78-10432-04
Chapter 2 Installation
Installing Your Router
Connecting a Hub
Before connecting a hub to the router, see Table 2-2 for information on setting the
TO HUB/TO PC button. To connect a hub, follow the steps in Figure 2-1.
(Figure 2-1 shows a Cisco 806 router, but the process is the same for a SOHO 71
router.)
Figure 2-1 Connecting a Hub
ETHERNET
SPEED
1
5
2
6
3
7
4
8
LED
100BaseTX
SOLID
10BaseT BLINK
1X 2X
3X 4X
5X
6X 7X
MDI MDI-X
8X
ETHERNET
TO HUB
TO PC
+5 VDC
3 2
1
10BASET
Model Cisco 806
COMPUTERS (E0)
ETHERNET 10BASET
INTERNET (E1)
CONSOLE
4
1. Set TO HUB/TO PC button.
4. If applicable, check setting
of hub equivalent of router
TO HUB/TO PC.
3. Connect other
end of cable
to hub.
2. Connect yellow cable
to ETHERNET port 4
on Cisco 806 router.
Cisco 806 router
Cisco 1528 Micro Hub 10/100
51815
To verify your hub connection, ensure that the COMPUTERS 4 LED on the front
panel is on after you have connected all cables and turned the router on. If the
LED does not turn on, see
Table 3-2 in Chapter 3 for troubleshooting information.
Note Leave PCs attached to the hub turned off until you have completed router
installation.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco 806 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco 806 in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info