63378

Cisco 7971G-GE Manual

206
Zoom out
Zoom in
Previous page
1/303
Next page
Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Status Menu
7-12
Cisco Unified IP Phone 7970G/7971G-GE for Cisco Unified Communications Manager 6.0
OL-12232-01
No DNS server IP A name was specified but DHCP or
static IP configuration did not specify a
DNS server address.
• If the phone has a static IP
address, verify that the DNS
server has been configured. See
the “Network Configuration
Menu” section on page 4-7 section
for details.
• If you are using DHCP, the DHCP
server has not provided a DNS
server. Check the DHCP server
configuration.
Programming Error The phone failed during programming. Attempt to resolve this error by power
cycling the phone. If the problem
persists, contact Cisco technical
support for additional assistance.
Successful – MD5 The phone attempted an 802.1X
transaction and authentication
achieved.
The phone achieved 802.1X
authentication.
TFTP access error TFTP server is pointing to a directory
that does not exist.
• If you are using DHCP, verify that
the DHCP server is pointing to the
correct TFTP server.
• If you are using static IP
addresses, check configuration of
TFTP server. See the “Network
Configuration Menu” section on
page 4-7 for details on assigning a
TFTP server.
TFTP Error The phone does not recognize an error
code provided by the TFTP server.
Contact the Cisco TAC.
TFTP file not found The requested load file (.bin) was not
found in the TFTPPath directory.
Check the load ID assigned to the
phone (from Cisco
Unified Communications Manager,
choose Device > Phone). Verify that
the TFTPPath directory contains a .bin
file with this load ID as the name.
Table 7-2 Status Messages on the Cisco Unified IP Phone 7970 Series (continued)
Message Description Possible Explanation and Action
… 206 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco 7971G-GE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco 7971G-GE in the language / languages: English as an attachment in your email.

The manual is 2,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cisco 7971G-GE

Cisco 7971G-GE Installation Guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info