Manual Cisco 7971G-GE (page 88 of 303) (English)

63378

Zoom out

Zoom in

1/303

Chapter 3 Setting Up the Cisco Unified IP Phone

Verifying the Phone Startup Process

3-16

Cisco Unified IP Phone 7970G/7971G-GE for Cisco Unified Communications Manager 6.0

OL-12232-01

Caution If the line keys flash red in sequence after flashing yellow, do not power down the

phone until the sequence of red flashes completes. This sequence can take several

minutes to complete.

3. Some or all of the line keys flash green.

Normally, this sequence takes just a few seconds. However, if the phone flash

memory is erased or the phone load is corrupted, the sequence of green

flashes will continue while the phone begins a software update procedure. If

the phone performs this procedure, the following buttons light to indicate

progress:

–

Headset—Phone is waiting for the network and completing CDP and

DHCP configuration. (A DHCP server must be available in your

network.)

–

Mute—Phone is downloading images from the TFTP server.

–

Speaker—Phone is writing images to its flash memory.

4. The phone screen displays the Cisco Systems, Inc., logo screen.

5. These messages appear as the phone starts:

–

Verifying load (if the phone load does not match the load on the TFTP

server). If this message appears, the phone start up again and repeats step

1 through step 4 above.

–

Configuring IP.

–

Updating CTL.

–

Updating Locale.

–

Configuring CM List.

–

Registering.

6. The main phone screen displays:

–

Current date and time

–

Primary directory number

–

Additional directory numbers and speed dial numbers, if configured

–

Softkeys

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cisco 7971G-GE in the language / languages: English as an attachment in your email.

The manual is 2,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cisco 7971G-GE

Cisco 7971G-GE Installation Guide - English - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cisco 7971G-GE Manual

Product: