63378

Cisco 7971G-GE Manual

75
Zoom out
Zoom in
Previous page
1/303
Next page
3-3
Cisco Unified IP Phone 7970G/7971G-GE for Cisco Unified Communications Manager 6.0
OL-12232-01
Chapter 3 Setting Up the Cisco Unified IP Phone
Understanding the Cisco Unified IP Phone 7970 Series Components
If you plan to use auto-registration, verify that it is enabled and properly
configured in Cisco Unified Communications Manager before connecting any
Cisco Unified IP Phone to the network. For information about enabling and
configuring auto-registration, refer to Cisco Unified Communications Manager
Administration Guide. Also, see the “Adding Phones to the Cisco
Unified Communications Manager Database” section on page 2-13.
You must use Cisco Unified Communications Manager to configure and assign
telephony features to the Cisco Unified IP Phones. See the “Telephony Features
Available for the Phone” section on page 5-2 for details.
In Cisco Unified Communications Manager, you can add users to the database
and associate them with specific phones. In this way, users gain access to web
pages that allow them to configure items such as call forwarding, speed dialing,
and voice messaging system options. See the “Adding Users to Cisco
Unified Communications Manager” section on page 5-32 for details.
Understanding the Cisco Unified IP Phone 7970
Series Components
The Cisco Unified IP Phone 7970 Series includes these components on the phone
or as accessories for the phone:
• Network and Access Ports, page 3-3
• Handset, page 3-4
• Speakerphone, page 3-4
• Headset, page 3-4
Network and Access Ports
The back of the Cisco Unified IP Phone includes these ports:
• Network port—Labeled 10/100 SW on the Cisco Unified IP Phone 7970G
and 10/100/1000 SW on the Cisco Unified IP Phone 7971G-GE
• Access port—Labeled 10/100 PC on the Cisco Unified IP Phone 7970G and
10/100/1000 PC on the Cisco Unified IP Phone 7971G-GE
… 75 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco 7971G-GE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco 7971G-GE in the language / languages: English as an attachment in your email.

The manual is 2,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cisco 7971G-GE

Cisco 7971G-GE Installation Guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info