63378

Cisco 7971G-GE Manual

50
Zoom out
Zoom in
Previous page
1/303
Next page
Chapter 1 An Overview of the Cisco Unified IP Phone
Overview of Configuring and Installing Cisco Unified IP Phones
1-32
Cisco Unified IP Phone 7970G/7971G-GE for Cisco Unified Communications Manager 6.0
OL-12232-01
Note Before you install a phone, even if it is new, upgrade the phone to the current
firmware image. For information about upgrading, refer to the Readme file for
your phone, which is located at:
http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser
After the phone is connected to the network, the phone startup process begins and
the phone registers with Cisco Unified Communications Manager. To finish
installing the phone, configure the network settings on the phone depending on
whether you enable or disable DHCP service.
If you used auto-registration, you need to update the specific configuration
information for the phone such as associating the phone with a user, changing the
button table, or directory number.
Checklist for Installing the Cisco Unified IP Phone 7970 Series
Table 1-7 provides an overview and checklist of installation tasks for the
Cisco Unified IP Phone 7970 Series. The list presents a suggested order to guide
you through the phone installation. Some tasks are optional, depending on your
system and user needs. For detailed procedures and information, refer to the
sources in the list.
Table 1-7 Checklist for Installing the Cisco Unified IP Phone 7970 Series
Task Purpose For More Information
1. Choose the power source for the phone:
• Power over Ethernet (PoE)
• External power supply
Determines how the phone
receives power.
See the “Providing Power
to the Phone” section on
page 2-4.
2. Assemble the phone, adjust phone
placement, and connect the network
cable.
Locates and installs the phone
in the network.
See the “Installing the
Cisco Unified IP Phone”
section on page 3-7.
See the “Adjusting the
Placement of the Cisco
Unified IP Phone” section
on page 3-12.
… 50 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco 7971G-GE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco 7971G-GE in the language / languages: English as an attachment in your email.

The manual is 2,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cisco 7971G-GE

Cisco 7971G-GE Installation Guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info