65656
30
Zoom out
Zoom in
Previous page
1/122
Next page
Chapter 1 Introducing Your Cisco IP Phone
Identifying Buttons and Hardware
1-6
Cisco IP Phone 7960G and 7940G User Guide
OL-4637-01
Step 2 Connect the handset to the handset port. Ensure that the end of the cord with the
longer uncoiled section is connected to the body of the phone.
Step 3 If your system administrator delivered your Cisco IP Phone with a power supply,
connect the power supply plug to the DC48V AC adapter port on the back of the
phone.
If your system administrator delivered your phone without a power supply, your
phone probably receives power through the Ethernet connection.
Step 4 Use the power cable to connect the power supply to a standard power outlet in
your workspace.
Step 5 To adjust the footstand height, release the footstand by pressing the footstand
adjustment knob and gently pull the footstand away from the body of the phone.
See the Adjusting the Handset Rest” section on page 1-13 for information on
adjusting the handset rest to make sure the receiver will sit securely in the cradle.
Startup
Once you connect the Cisco IP Phone to its power source, a startup process
begins. After several minutes, the phone’s LCD screen displays a neutral “ready”
screen. The details on your screen might vary, but a ready screen typically
displays the date and time, your extension number, and the available softkeys.
Startup is complete and your phone is ready to use.
Tip Softkeys point to feature options displayed along the bottom of your LCD screen.
Softkeys are flexible—they change depending on the status of your phone. See the
“Using Softkeys” section on page 1-11 for additional information.
Identifying Buttons and Hardware
See the following illustrations and table to identify the buttons and hardware on
your Cisco IP Phone, and find descriptions of related features.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco 7960G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco 7960G in the language / languages: English as an attachment in your email.

The manual is 4,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info